This is used to raise and lower the door for alignment. The right refrigerator door has an adjustable nut, located at the bottom hinge of the door. If after verifying the leveling of the cabinet, the doors are still uneven, you may need to align the refrigerator doors themselves.ĭoor alignment can be used when the top of your refrigerator doors are uneven, to proceed follow these steps. When finished, use a level to verify the side-to-side leveling of the cabinet. It may take several more turns, and you should turn both the leveling screws by the same amount.ĭepending on the flatness of your floor, more or less adjustment may be required to provide enough back tilt for the doors to close easily. If they don't, tilt the refrigerator slightly more to the rear by turning both leveling screws clockwise. Open both doors again and check to make sure that they closed easily. It may take several terms of the leveling screw to adjust the tilt of the refrigerator. Or counter clockwise or right to lower it. Turn the leveling screw clockwise or left to raise that side. Use a flathead screwdriver to adjust the leveling screws. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator tilt using these instructions. Your LG refrigerator has two front leveling screws, one on the right and one on the left. Use a Phillips head screwdriver to remove both the left and the right holding screws. To level the cabinet of the refrigerator, first, remove the base grill. The second possible cause is the doors being uneven, and should only be checked after the level of the cabinet has been verified. One cause is an uneven refrigerator cabinet. When your refrigerator doors appear to be uneven, there are 2 possible causes. Welcome to the LG customer support channel. LG Refrigerator Side by Side Leveling & Door Alignment
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |